Concrete screws
Fastener SuperStore carries Concrete Screws in Hex Washer Head and Countersunk/Flat Head options.
For light and medium duty applications into masonry, bricks & concrete, Concrete Screws are a great alternative to anchors.
Fastener SuperStore carries Concrete Screws with a hex head and a slotted drive, or with a flat head and a phillips drive. Both types come in Blue Perma Seal, a three layer finish combining a metallic zinc coating, followed by a chemical conversion film, and finally a baked ceramic outside coating.
Concrete screws require pre-drilling a pilot hole with a hammer drill fitted with the appropriately sized masonry bit. A double lead thread with alternating high and low threads, along with a diamond shaped nail-type point allow the screw to cut its own threads into these hard materials.
We carry Concrete Screws in the common diameters of 3/16″ and 1/4″, with lengths from 1 1/4″ up to 4″. Pilot holes should be the depth of the required embedment (length of the screw) plus 1/2″.
All of our Concrete Screws come in cartons of 100, but if you’re looking for a larger quantity give us a call or send us an email and we’ll get back to you with a quote.
Related problem
What type of screw is best for concrete?
A concrete screw with hex head is a heavy-duty self-tapping screw with a washer. It can cut through concrete, solid brick, hollow brick and stone. The hex head allows firmer tightening than some other options.